Recent content by AMH1955 | TYCO US-1 Electric Trucking Slot Cars Discussion Forum Club

Recent content by AMH1955

  1. AMH1955

    My new GM Pick-Up & Boat with Trailer Combo

    I wanted to do this for a while. I got a Greenlight Suburban with boat and trailer and took the hitch off the truck and attached it to a US-1 chassis. I took out one of the mounting screws for the boat and replaced it with a machine screw and filed it down to make a guide pin for the trailer...
  2. AMH1955

    Added a few trees to my layout

    I purchased some trees from China on ebay and stuck them on some painted green foamboard hunks with hot glue and scattered them around my layout. I think I need some more now. Those things can be expensive but these were only 20 bucks shipped for 70 of them, took less than two weeks to get...
  3. AMH1955

    Whitening Pipe for Crane

    You have sun there? lol. Stuck in the drizzly remnants of the hurricane up here in northeast Ohio. I would have painted them there barrels white, now I know better.
  4. AMH1955

    ISO # B-5837 Road and Rail track

    The black ones normally go for less but not always. I've seen messed up ones with stains or discoloration go for a lot less than normal. If you aren't a purist you can paint them gray.
  5. AMH1955

    3-D Printed 3443 Disabled Car pickup

    Yes you have to add the metal rails. I used the rails from some track with broken tabs. I don't know what you could use other than old rails, it's no big deal to remove them then cut them to length with sidecutters and glue them in place from the bottom with some E6000.
  6. AMH1955

    Any recommendations for Grass Mats

    It's more of an indoor-outdoor green carpet than artificial grass. The fibers look like shiny green plastic. Mine is about a 1/4-3/8 inch thick with a black rubber backing. Lowes has something similar called "Grizzly Grass", hard to tell if it's the same as the stuff I got there, looks a...
  7. AMH1955

    B9264 Shell Roadside Service Billboard Sign in 7656Q train listing

    Is it the same color as the wrecker billboard? It looks like it's more of a red color. I found out about the billboard being in that train set in the Tyco US-1 Wiki.
  8. AMH1955

    New Water Tower in Central City

    I built a water tower and added it to my layout. I got it on eBay, 1/64 scale/S scale 3D printed. It took me two days to fix all the inherent lousy 3D printing defects and a day to paint it and put it together. The Central City fire department was complaining of low water pressure, this...
  9. AMH1955

    B9264 Shell Roadside Service Billboard Sign in 7656Q train listing

    As far as I know it was only included in that train set. I see the set once in a while online for sale and it goes for good money. https://ebay.us/flH8oc
  10. AMH1955

    3-D Printed 3443 Disabled Car pickup

    I used Rust-Oleum Painter's Touch 2X Ultra Cover Paint+Primer spray. The color is Satin Stone Gray. It's made to bond to plastic. I use it on black track to turn it gray too. It isn't an exact match but close enough.
  11. AMH1955

    3-D Printed 3443 Disabled Car pickup

    I like the dude waiting for the wrecker with the boom box for his tunes. Wait until he gets the bill for a heavy wrecker to put that Firebird on the hook. I have the same track and it does work fine. I sanded the 3D printer grooves out of mine and painted it to match the track a little better.
  12. AMH1955

    Whiten your yellowing 3445 Exxon Garage

    I painted a really yellowed one and sold it for good bucks on ebay. I disclosed that it was painted. Masking the red trim wasn't too bad.
  13. AMH1955

    B9264 Shell Roadside Service Billboard Sign in 7656Q train listing

    That sign is probably from the Chef Boy-Ar-Dee train set. My landlord years ago was a chef and Chef Boy-Ar-Dee was his good buddy. He told me he got his start making prepared meals for prisons.
  14. AMH1955

    Added guardrails to my layout

    I like the yeller ones, to each their own. Does Tyco make gray ones? I have some generic gray ones and they don't clip onto the track well and interfere with the trailers when they swing out around the corners and deslot them. I had a littler trouble with the wrecker rear tires on the ends...
  15. AMH1955

    Added guardrails to my layout

    My track looked bare without guardrails to me so I added 70 of them. Now it looks more like a real highway. Tested with several different type US-1 vehicles and trailers and they all clear okay. They're genuine Tyco guardrails, some of the knock-offs are too close to the track and the vehicles...