Shell Wrecker Tow Hook Installation & Removal

[biddle]

How does the tow hook come off the Wrecker? I bought a Rhodium plated brass one last year from Shapeways and never installed it.

US-1 TRUCKING REPLACEMENT TOW TRUCK HOOK

THIS IS A REPLACMENT TOW HOOK FOR THE US-1 WRECKER. WORKS GREAT HAS BEEN TESTED. MADE FROM HIGH QUAILTY MATERIALS.

extreme3dcustoms.com

 

[AMH1955]

I checked out mine and it sure looks like you would unsnap the light bar from the body then tilt the light bar and boom back and down so the hook can be removed from the opening in the body then unsnap the hook from the boom, the scary part, and snap the new one one on. The boom has that tab on top that holds the hook pivot down but it is pretty sloppy, may come off easy. You could probably put a little pressure on that tab to help give it some clearance if it's tight, lubrication always helps too,. I would run it under some hot water to expand the opening a touch and give it a little more flexibility too if it gets stubborn. The plastic seems pretty flexible, not like it would break easily or it would, always see the hooks missing and the booms look okay so the hook must come off easy? If it's like the chassis plastic you could really bend it without breaking but who knows. Shapeways sells the parts anyway. Good luck!

 

[Tyco Trucking]

How does the tow hook come off the Wrecker? I bought a Rhodium plated brass one last year from Shapeways and never installed it.

Shapeways & Thangs Marketplace for 3D Creators - Shapeways Blog

Discover the Thangs Marketplace powered by Shapeways — a new 3D printing platform where creators can sell, print, and share designs.

www.shapeways.com

Grab the hook and pull it down to release it from the bottom of the body. Tilt it back against the boom. You’ll see a bit of space open up and then you can carefully push it out of one side of the saddle and it should come off.